Friday, 27 December 2013

7 Plumbing Tips - DIY

There are many things that can go wrong in your home. But one of the most annoying things to go wrong is an issue with your water system. Its important that you know what is going on with your water system to avoid break downs. Read the article below for some basic plumbing tips!
  1. Ensure you are familiar with turning off your main water valve (it’s usually by the water meter). If you ever have a leak somewhere, this will be the first thing you’ll want to do, and the faster you can do it the less water damage there will be and the more money you will save. You should also make notes of where all the other valves are for your hot water heater, washing machine, dishwasher, sinks, etc – and you should test these by closing and opening them once a year.
  2. Know what you can and cannot put down the drain (including oils, fats, and more). Some things that you put down your drain will cause a blockage to occur. A bad blockage can shutdown your entire water system.
  3. Know what you can and cannot put down your garbage disposal unit. Again, not everything can be put down your disposal unit. Be cautious and educate those in your household.
  4. Know the different types of plungers and when you should use each. Using a particular plunger will give you a particular result. Using a plunger correctly to unblock a drain can save you a lot of money, as you will not need to call out a plumber.
  5. You can clear a blocked drain with off-the-shelf chemicals or with ½ a cup vinegar and 1/2 cup baking soda poured in at once followed by hot water. However, take into account these are only temporary fixes. Even with multiple treatments with chemicals, the main clog can still be building up (and you can damage the pipes if apply too many), looming to the day it will backup. It’s recommend you have your drains inspected with a drain camera and/or cleared every 3-5 years to avoid a major backup, and much bigger problems. You should really have an inspection if you notice floor or basement drains are not as fast as they should be, this is something you should call a plumber to look at.
  6. Keep your outside gutters and drains clear and free of debris and tree roots. Keep an eye out for abnormal puddling of water on the ground, which can sometimes mean an underground leak is occuring.
  7. Keep the number of your local plumber handy, as oftentimes you need help fast. Knowing this in advance reduces the need to do quick research on the internet that might result in hiring an unqualified or fly-by-night plumber.
If you have an issue with a blocked drain Melbourne or hot water system Melbourne, then you need a 24 hour plumber Melbourne or an emergency plumber Melbourne to service you. You might also reach out to a gas plumber Melbourne to help you. Its important that you have a plumber Melbourne or Melbourne plumber you can trust.
If you are having further issues, get in touch with a great plumber from Melbourne 24 Hour Plumbing  

Tuesday, 24 December 2013

Plumber Melbourne - Youtube clip on plumber melbourne

Plumber Melbourne





If you have an issue with a blocked drain Melbourne or hot water system Melbourne, then you need a 24 hour plumber Melbourne or an emergency plumber Melbourne to service you. You might also reach out to a gas plumber Melbourne to help you. Its important that you have a plumber Melbourne or Melbourne plumber you can trust. 

7 Signs Your Drain Is Blocked

Drainage is one of the most important aspects of a plumbing system. In fact, when your drainage does not work, your whole water system will be unavailable for use. That means no flushing toilet, no working taps, no baths or showers and no air conditioning in some cases. Read the article below to help you identify when your drain is blocked.

Over time, every household or business will face a blocked drain. It’s almost inevitable that this will occur. People throw things down the drain that will ultimately lead to the drain being blocked. Below are some signs that will help you identify when your drain is starting to block up or is blocked.

1. You will notice that multiple fixtures are not draining properly, and especially toilets. Toilets have the most direct connection to the drain, so are often the first indication. However, sinks and bathtub drains may also become slow or stop draining.
2. You will notice strange reactions when using plumbing fixtures. For example, when you flush the toilet and water coming up the bathtub drain. This is usually a clear indication of a sewer drain that is blocked.
3. You may also notice that drains are very slow to drain, they gurgle, or smell of sewage.
4. A common occurrence is that you see bubbles in the toilet. When the sewer drain line becomes blocked air becomes trapped on your end of the blockage. When you run the tap in the sink, you might see bubbles come up the toilet or see the water level rise.
5. If you have a drain clean out and know where it is located, you can check this to see if there is any visible blockage. Or if water is coming out of it, it confirms a sewer drain clog.
6. When your toilet is flushed, sewer water backs up through a low-lying drain, like your basement drain or outside patio or driveway drain.
When you run the washing machine, soapy water comes up the bathtub or toilet drain.
7. If you notice any of the above signs, it’s very likely that your sewer drain line is becoming or is blocked. This is something you need to fix as soon as possible, as it will eventually lead to a full backup, causing damage to your home and an annoyance to you. It’s also best to ensure the problem is fixed effectively the first time so the issue doesn’t happen again, which is why we encourage you to give us a professional plumber a call.

 Most importantly, prevention is key, so that you don’t even come to the point of seeing any of the above signs. You can get a plumber to perform a drain camera inspection to check out your drains.

If you have an issue with a blocked drain Melbourne or hot water system Melbourne, then you need a 24 hour plumber Melbourne or an emergency plumber Melbourne to service you. You might also reach out to a gas plumber Melbourne to help you. Its important that you have a plumber Melbourne or Melbourne plumber you can trust.

If you are having further issues, get in touch with a great plumber from Melbourne 24 Hour PlumbingMr Plumber SydneyManly Emergency Plumber, Geelong 24 Hour Plumbing or Mr Plumber Perth.
x

Thursday, 19 December 2013

Clearing Your Blocked Drain

We are all very reliant on the water systems in our homes running smoothly. When things are going well, its human nature not to worry about it. One of the most annoying things to break in your water system is a blocked drain. This stops you from using the water system altogether. Read this article on how to clear a blocked drain
Tips on how to clear a blocked drain

To clear a blocked drain, plungers work very well if you use them in the correct manner. A plunger should be the first tool you use when a blockage happens. When you are trying to unblock a bathtub or bathroom sink drain, you'll most likely get the best results if you remove the stopper mechanism from the drain inlet. To do this, locate the control rod attached to the drainpipe below the sink. You will need to carefully remove the rod – it’s usually secured by spring clip. The rod intersects your stopper stem like a thread through a needle. You will need to pull the stopper all the way out to free the stopper stem. Once completed, you can now pull the stopper unit up and out of the sink.

Place a tub or a bucket under your sink trap before you pull the rod out. Expect a flow of dirty water escaping the rod hole when you pull it out.

Steps to clearing a blocked drain

The first thing to do is pull the stopper out of the sink. You will probably find a lovely ball of hair and soap goop clinging to the stopper rod. Usually, a good de-gooping will solve the drainage problem. After you have cleared the rod, drop the stopper unit back into the drain opening. Replace the control rod, making sure that it's "threaded" correctly back into the slot in the stopper stem by checking that the stopper lifts and drops as it should. Lastly, secure the rod with its nut and clip. 

The drain stopper on your bathtub is most likely attached to the lever on the overflow outlet. You can typically access the drain stopper by removing the overflow cover with a small screwdriver. You can then pull up the drain stopper to remove the lever and the tub stopper.

If the drain is still sluggish, try the following: grab your plunger and a wet washrag. Fill the sink, or bathtub about two inches deep with water. Hold the rag tightly against the overflow holes and plunge down hard two to four times. Make sure the head of the plunger is right up against the surface so that you get a good vacuum when you plunge. If you're lucky, that will do the trick fairly easily, and water will flow readily down the drain. If plunging doesn't work, it may be time to call in a professional plumber.
If you are having further issues, get in touch with a great plumber from Melbourne 24 Hour PlumbingMr Plumber SydneyManly Emergency PlumberGeelong 24 Hour Plumbing or Mr Plumber Perth
If you have an issue with a blocked drain Melbourne or hot water system Melbourne, then you need a 24 hour plumber Melbourne or an emergency plumber Melbourne to service you. You might also reach out to a gas plumber Melbourne to help you. Its important that you have a plumber Melbourne or Melbourne plumber you can trust. 

Monday, 16 December 2013

Eco Friendly Plumbing Advice

Below, are some great ways to make your own home more environmentally friendly.

  • Installing a low-flow toilet can result in 30% less litres of water used per flush. Taking into account that toilets represent about 30% of your household water usage (second only to the shower), this is significant water conservation.
  • Installing a low-flow shower head can result in 50% less litres of water used per shower. On average, a five-minute shower with a regular shower head will use 100 litres of water. A five-minute shower with a low-flow shower head will only use 35 litres of water. A good quality low-flow shower head will feel the exact same as a regular one. Save water and save money at the same time by installing a low-flow shower head.
  •  A semi filled bath saves more water than a short shower. A comfortable bath usually takes approximately 150 litres of water. A shower uses about 11-20 litres of water per minute. Doing the math, that means that if you’re going to take a shower for about 10 minutes or more, it’s more economical and you’ll save more water if you take a semi filled bath.
  •  A leaky faucet can waste up to 75 litres of water per day.  Keep an eye out for leaks and have them fixed as quickly as possible. Loosing 75 litres of water a day is equivalent to a half filled bath from above!
  • A running toilet can waste up to 750 litres of water per day! That’s a lot of water being used for nothing.
  • Consider purchasing a tankless water heater. A tankless water heater in some cases can save you up to 40% on energy for hot water.
  • Keep an eye out for hidden plumbing leaks. Plumbing outside the home often go undetected unless you look for them. Approximately, up to 30% of water entering supply-line systems can be lost to leaking pipes. Make sure you call your local plumber if you notice this occurring.
  • When rinsing fruits and vegetables, do not use running water. Fill a small bowl with water to rinse the fruit and vegetables instead.
  • Turn the water off when you are brushing your teeth, and only use short bursts to rinse out your mouth.
  • Clean your sidewalks and driveway with a broom and not a garden hose.
  • The best method to check if you have leaks in your water system is to turn off all taps in your home. Then go to the water meter for your home and see if it is still running. If its still running, you have a water leak somewhere.


I If you have an issue with a blocked drain Melbourne or hot water system Melbourne, then you need a 24 hour plumber Melbourne or an emergency plumber Melbourne to service you. You might also reach out to a gas plumber Melbourne to help you. Its important that you have a plumber Melbourne or Melbourne plumber you can trust. 


If you are having further issues, get in touch with a great plumber from Melbourne 24 Hour PlumbingMr Plumber SydneyManly Emergency Plumber, Geelong 24 Hour Plumbing or Mr Plumber Perth.


Friday, 13 December 2013

Fixing A Leaking Tap


There are many issues that can occur in the plumbing system in your home. Most of them are very frustrating! But the most annoying of all is drip, drip, drip! A leaking tap is a headache everybody faces at some time.


The main reason for a leaking is typically the result of a worn or damaged washer. It is very easy to fix. If you want to save yourself some money, then read the article below instead of calling out a plumber. Plumbers will charge you more to attend your house on the weekend so be sure to read this article. Below is a step-by-step guide to replace your washer.


To replace a washer, you need to know what size the washer is.  As a rule of thumb:

  • Taps which turn on and off with a quarter-turn, have a ceramic disk inside a replaceable cartridge.
  • Taps which need to be turned several times have rubber sealing washers. It is very common that basin and bath taps have different sizes.
  • Mixer type taps normally have smaller washers.

When you go to the hardware store, tither take your old washer to the hardware store, or buy a packet with several different sized washers. Washers are not expensive.
The tools required to replace the washer are a spanner, screwdriver, some wire wool, a cloth, and a new washer.

1.  Turn off the main water supply to the faulty tap.  There might be a valve for the entire house (usually located close to the kitchen sink). It could possibly have its own valve, which turns off the supply to only that basin, sink or bath. 
2.  Turn the tap on fully to check that the water supply is switched off. There should be a small drip or trickle of water when this is done.
3.  Take off the faulty tap.  Usually, the tap can be pulled off, or you might need to remove the hot and cold indicator disk and then pull it off. It that does not work, it might have a small screw underneath it.
4.  You should now be able to see the stem of the tap, with a brass nut holding it in place. Unscrew the nut with a spanner, and lift out the tap stem.  The washer is on the bottom of the piece.  Remove the washer, and clean off any corrosion or scale using the wire wool.  Put on a new washer of the same size.  You should be able to just push it on, or, it may be held on with a small nut.
5.  Put the tap back together, turn the water supply back on, and you have fixed the leak and saved yourself money!


If you are having further issues, get in touch with a great plumber from Melbourne 24 Hour PlumbingMr Plumber SydneyManly Emergency Plumber, Geelong 24 Hour Plumbing or Mr Plumber Perth.


If you have an issue with a blocked drain Melbourne or hot water system Melbourne, then you need a 24 hour plumber Melbourne or an emergency plumber Melbourne to service you. You might also reach out to a gas plumber Melbourne to help you. Its important that you have a plumber Melbourne or Melbourne plumber you can trust. 

Tuesday, 10 December 2013

Emergency Plumber Melbourne Youtube Vid

Emergency Plumber


If you have an issue with a blocked drain Melbourne or hot water system Melbourne, then you need a 24 hour plumber Melbourne or an emergency plumber Melbourne to service you. You might also reach out to a gas plumber Melbourne to help you. Its important that you have a plumber Melbourne or Melbourne plumber you can trust. 

DIY Plumbing Mistakes

The cost of hiring a professional plumber can be quite high even for the small plumbing tasks. In an attempt to save some money, many house owners will choose to carry out the small fixes on their own instead of hiring a plumbing professional. However, any small mistakes when carrying out a plumbing fix could lead to bigger problems which can only be fixed by an emergency plumber. An emergency situation that happens after house will cost you more in terms of added fees by the plumber.

The most common and general plumbing mistake involves wrong selection of pipes when repairing leaks in your house. This is both in terms of the size and the type of the pipe that is used. The pipes may therefore fail to fit into each other, as you require. Using too much force when connecting two pipes together or forcing the connectors may break the pipes or the connectors. Further leaks may develop in the pipes and they may burst when pressure builds up in them. Corrosion may also occur if you get the pipe type wrong. Professional plumbers know when to use galvanized pipes and when to use copper pipes. Connecting the two will lead to corrosion which will require regular replacement of the pipes.

Improvising makeshift tools and equipment in place of what the professional plumber uses is another regular mistake. For example, many people use marbles or ball bearings in place of a real level when installing or repairing bathroom fixtures. A ball bearing or marble may not exactly work when checking the level and this could force you into unnecessary reworks. Getting the level wrong when installing the toilet could also lead to slow flow of sewer or even backups in the pipes. Using the correct tools for a given task will not only save you time but will also ensure that the pipes do not crack as you are fitting them.

You need to have a good design of where the sewer pipes are to be placed. This is especially the case when carrying out plumbing work in the upper floors of a building or apartment block. An odd DIY plumbing mistake involves routing the pipes in the wrong places so that they interfere with occupants of the lower floors of the building. Imagine a scenario where you are always woken up by the sound of toilet flushing from the floors above. A common practice by professional plumbers involves designing and planning the drainage network before implementation.

The last DIY plumbing mistake in the list is failure to turn off the water stopcock before attempting any type of repairs. This is always the first thing that a professional plumber will do even for the smallest plumbing tasks at hand. Doing so prevents flooding, which often causes damage to household items. It will also take you added time to drain the water from the room.
Trying to fix a small problem on your own and getting it wrong could create a major problem. Hiring an emergency plumber to rectify the bigger problem will cost you more. You should therefore take your time when doing your own plumbing work to avoid such mistakes or call a professional plumber in case you are not sure hot to mend the problem.

If you have an issue with a blocked drain Melbourne or hot water system Melbourne, then you need a 24 hour plumber Melbourne or an emergency plumber Melbourne to service you. You might also reach out to a gas plumber Melbourne to help you. Its important that you have a plumber Melbourne or Melbourne plumber you can trust.